|
Specifications
POWER STATION
• Input 220 volts single phase
50 or 60 Hz
• Adjustable output from 0 to 100
volts, with display of voltage
• Direct current rectified by silicon
diodes. Ammeter with 2 ranges
0 to 10 and 0 to 20 Amp
• 5 pushbuttons for function selection
• 2 timers, polishing and etching
• Rear output to electrolysis unit and
front connector for work with
special clamp-type holder
• Time delays for starting and
electrolyte flow control.
ELECTROLYSIS UNIT
• PVC base, with rack and pinion
system, crank driven vertical
movement
• Moving assembly in PVC with
circulation pump and electric motor
• Motor with variable speed to adjust
the electrolyte flow
• Stainless steel cooling coil
• 5 PVC covers with openings
of different shapes and sizes
• Revolving plastic-coated stainless
steel rod as current feeder
• 2 litre glass beaker.
|
Operating
The POLISEC C 25 has been
designed on the basis of many
years of experience.
• The Power Station, with
adjustable output voltage
between 0 and 100 V, supplies a
rectified current of 0 to 10 Amps
or 0 to 20 Amps for time periods
set between 0 and 99 seconds.
• The Electrolysis Unit is
designed to withstand both
mechanical shock and corrosion.
It includes a body that forms
a base for the moving assembly
and the electrolyte reservoir,
he moving assembly with a pump
and a motor, a cooling coil and
an electrolysis chamber equipped
with electrodes.
|
